Home/Acoustical Ceilings
09 51 00 · Acoustical Ceilings
T-bar & suspended ceiling crews
Grid laid out to the reflected ceiling plan, hung dead level, and tiled tight around every light, diffuser and sprinkler head. You supply the grid, wire and tile. We supply the crew that makes the ceiling line up.
Labour only — materials provided by GCWhat’s included
Scope we cover
- Main tee and cross tee layout to the RCP
- Hanger wire, anchors and seismic clips
- Perimeter wall angle and shadow moulding
- 15/16" and 9/16" grid systems
- Acoustic tile set and cut-in
- Cuts around lights, diffusers and sprinklers
- Access panels and bulkhead framing
- Grid re-work, re-levelling and tile swaps
- Tile replacement after other trades
- Site clean-down and offcut removal
Anything outside this list, ask — if it’s labour, it’s usually a yes.
Why GCs hire us
What you actually get
The grid lines up with the room
We set out from the RCP and centre the field so you don’t end up with a sliver tile against the feature wall. Layout gets confirmed with your super before wire goes up.
Dead level across the whole field
Laser-set and checked as we go. A ceiling that dips is the first thing an owner notices on a walk-through and the last thing you want to rehang.
Cuts that fit the mechanical
Lights, diffusers, sprinklers and speakers all land in the tile. We coordinate with the trades above the grid so the penetrations are clean, not fudged.
We come back for the tile drop
Grid goes in early, tile goes in late. We schedule the final tile set after the other trades are out so your finished ceiling stays finished.
Photos
On site
Retail build-out
Office ceiling
Mechanical coordination
Bulkhead detail
Add ceiling photos here. A wide shot down a long corridor showing the grid lines running true is the strongest image for this trade.
Need ceiling crews on site?
Send the reflected ceiling plan and the square footage. We’ll come back with a labour rate and crew availability.